PC-98 format

From Princed Wiki
Revision as of 10:56, 2 March 2022 by Norbert (talk | contribs) (Block flags and objects)
Jump to: navigation, search

This document describes the format of data in Prince of Persia 1 for the PC-98.

General

Byte order: Numbers larger than a byte use little-endian (Intel) byte order, unless noted otherwise.

Number systems: Hexadecimal numbers are prefixed with 0x. This is omitted in sequences of bytes, for readability.

Numbering of bits: The least significant bit of a byte is bit 0, the most significant bit of a byte is bit 7.

Tools: A Japanese programmer, Zarazala, has made some tools for working with the files described in this document. You can get them from #External links. In each section below, I mention the relevant tool.

Disk images

Disk images can be either headerless (*.TFD), or have a header (*.FDI). Emulators can use both.

Online, this game is most commonly found in *.FDI files, these have a header of 0x1000 bytes.

  • Tools: datacut.exe to extract files from a (headerless!) disk image, makeimg.exe to make a disk image from files.

How recognize and convert headered images

A headerless game disk starts with the bytes EB 0A. If they appear at offset 0x1000 then you have a headered disk image.

To convert a headered disk image to headerless, go to offset 0x1000 and delete everything before it. You might want to save the new file under a different name.

FDI header

The FDI header contains the following information:

Offset in bytes Size Value in PoP disk images Meaning
0x00 4 bytes 0 (unknown)
0x04 4 bytes 0x90 = 144 (unknown)
0x08 4 bytes 0x1000 = 4096 Start offset of the raw disk image (i.e. the size of the FDI header).
0x0C 4 bytes 0x134000 = 1261568 Size of the raw disk image in bytes.
0x10 4 bytes 0x400 = 1024 Size of a sector (or cluster?) in bytes.
0x14 4 bytes 8 Number of sectors per track?
0x18 4 bytes 2 Number of sides?
0x1C 4 bytes 0x4D = 77 Number of tracks per side?

If you multiply the last four numbers, you get the size of the raw disk image: 0x400 * 8 * 2 * 0x4D = 0x134000.

The rest of the header is filled with zeroes.

File system

A disk consists of 0x4D0 sectors, numbered from 0 to 0x4CF. Each sector is 0x400 = 1024 bytes.

The game disk (disk A) contains the following parts:

Offset in bytes Occupied sectors Contents
0x0000 - 0x03FF 0 #Boot sector
0x0400 - 0x0FFF 1 - 3 #File allocation table
0x1000 - 0x1FFF 4 - 7 #Directory
0x2000 - 0x133FFF 8 - 0x4CF Data area

The offsets in the table assume you have a headerless disk image.

Boot sector

The boot sector contains the code for starting the game.

From offset 2 is the disk label "GAME DISK" on disk A, and "USER DISK" on disk B.

Directory

This area contains 0x100 = 256 entries, of 0x10 = 16 bytes each.

Each entry describes a file in the following format:

Offset in bytes Size Meaning
0 8 bytes Base name. If it's shorter than 8 characters then it's padded with spaces (0x20).
8 3 bytes Extension. (The same padding is used here, although it does not occur in the original PoP disk image.)
0x0B = 11 3 bytes Unknown. Might be file attributes and/or modification date/time?
0x0E = 14 2 bytes The number of the first sector of this file.

To get the full file name, concatenate the base name (with padding removed), a dot, and the extension.

Unused entries are filled with 0xFF bytes.

File allocation table

This area contains 2-byte entries for each sector on the disk.

There is space for 0x600 entries, but only the first 0x4D0 entries are used, since the disk has only that many sectors. The unused entries are filled with zeroes.

The possible values of each entry are:

  • 0xFFFF : If the sector is before the data area (sectors 0-7).
  • 0x0008 - 0x04CF : If this sector is part of a file but not the last sector.
    • This whole sector is part of the file.
    • The value is the number of the next sector of the file.
  • 0xFC00 - 0xFFFF : If this is the last sector of a file.
    • Subtract 0xFC00 from the value to get a size. The first size bytes of this sector are part of the file.
    • If you get 0 from the subtraction, then the whole sector is part of the file. (This does not occur in the original PoP disk image, though.)
    • The unused area of last sectors is filled with 0x00. (makeimg.exe fills it with 0xE5.)
  • 0x0000 : If the sector is not used or does not exist (unused entries).
    • Unused sectors are filled with 0xE5.

How to read a file

  • Find the file in the #Directory.
  • Read the number of the first sector into current_sector.
  • Repeat until exit:
    • current_sector should be a valid sector number pointing into the data area (between 0x0008 and 0x04CF). If it's not then it's an error.
    • Read the #File allocation table entry corresponding to current_sector into next_sector. (offset = 0x400 + (current_sector * 2), length = 2)
    • Read the sector numbered current_sector into sector_data. (offset = current_sector * 0x400, length = 0x400)
    • If next_sector < 0xFC00:
      • Append sector_data to the output.
      • Set current_sector to next_sector.
      • Continue the loop.
    • else:
      • Set size to next_sector - 0xFC00.
      • If size = 0 then set size to 0x400.
      • Append the first size bytes of sector_data to the output.
      • Exit the loop.
  • Done.

List of files

In the order they appear in the #Directory:

file format contents
MUSIC.SYS program music player
MAIN.PRG program gameplay, cutscenes, #Hit point images
SUBPROG.PRG program menus, intro, ending
BJLOGO.PRG program #Broderbund logo animation (BJ = Broderbund Japan?)
PALET.DAT palette the palette used by the game
FONT.DAT font font used in the menu, and for messages like the level number
FIRE.DAT sprites torch flame used on the levels
MUSIC1.MUS music level 0, 4-6, 10-11
MUSIC2.MUS music level 1-3, 7-9
MUSIC3.MUS music level 14
MUSIC4.MUS music level 12-13
FIGHT.MUS music guard fight
FIGHTF.MUS music final fight (level 15)
FIGHTS.MUS music skeleton fight (level 3)
FIGHTK.MUS music shadow fight (level 12) (K might stand for kage, Japanese for shadow.)
VICT1.MUS music guard died
APPEAR.MUS music meet Jaffar on level 14
APPEAR2.MUS music meet shadow on level 6, meet level 13 boss
PICKUP.MUS music get sword
POWUP.MUS music big potion, merged shadow (level 12)
KUSURI.MUS music heal potion (kusuri is Japanese for medicine.)
CLEAR.MUS music level complete
EXIT.MUS music exit door open
DEAD.MUS music died outside battle
DEAD2.MUS music died in battle
OPEN.MUS music title screen, intro
ROOM1.MUS music intro cutscene
ROOM2.MUS music cutscenes
END1.MUS music ending: meet the princess
END2.MUS music ending: memories
END3.MUS music ending: garden
TIMEOUT.MUS music time expired
MENU.MUS music main menu
SOUND.EFC sound effects sound effects used when synthesizer hardware is available (in Neko Project 2: Device → Sounds → PC-9801-86)
BEEP.EFC sound effects sound effects used when only a beeper is available (in Neko Project 2: Device → Sounds → Disable boards)
JAFFER1.DAT background Intro: Jaffar's face
JAFFER2.DAT background Intro: Jaffar's hands and top half of crystal ball
JAFFER3.DAT background Intro: bottom half of crystal ball
OPEN1.DAT background Intro: In the crystal ball: the prince and the princess
OPEN2.DAT background Intro: In the crystal ball: the prince and the princess caught
OPEN3.DAT background Intro: In the crystal ball: the prince in dungeon
OPEN11.DAT background Intro: Waving water for OPEN1.DAT
OPEN12.DAT background Intro: Waving water for OPEN1.DAT
OPEN32.DAT background Intro: Torch flame for OPEN3.DAT
OPEN33.DAT background Intro: Torch flame for OPEN3.DAT
JAF_S1.DAT background Intro: Jaffar grinning
JAF_S2.DAT background Intro: Jaffar grinning
JAF_E1.DAT background Intro: Jaffar's eyes glowing
JAF_E2.DAT background Intro: Jaffar's eyes glowing
JAF_E3.DAT background Intro: Jaffar's eyes glowing
JAF_E4.DAT background Intro: Jaffar's eyes glowing
TITLE.DAT background Title screen: Persia at night
TITLE2.DAT background Title screen: game title
TITLE3.DAT background Title screen: copyrights
TITLE4.DAT background Title screen: "a game by Jordan Mechner"
PROOM.DAT background Princess's room
VCLIP.DAT raw 1bpp image? clipping masks?
MOYOU.DAT background background of the main menu (moyō is Japanese for pattern, design.)
TRAP.DAT (compressed) sprites traps, potions, doors, everything not part of the background (level objects except buttons and loose floors)
PLATE1.DAT (compressed) sprites buttons, loose floors for LEV01.CHR
PLATE4.DAT (compressed) sprites buttons, loose floors for LEV04.CHR
PLATE7.DAT (compressed) sprites buttons, loose floors for LEV07.CHR
PLATEA.DAT (compressed) sprites buttons, loose floors for LEV10.CHR
PLATEC.DAT (compressed) sprites buttons, loose floors for LEV12.CHR
PLATEE.DAT (compressed) sprites button for LEV14.CHR
CHTAB1.DAT (compressed) sprites prince
CHTAB2.DAT (compressed) sprites prince and mouse
CHTAB3.DAT (compressed) sprites prince and sword
CHTAB4F.DAT (compressed) sprites fat guard on level 6
CHTAB4G.DAT (compressed) sprites regular guard
CHTAB4K.DAT (compressed) sprites shadow on level 12 (K might stand for kage, Japanese for shadow.)
CHTAB4S.DAT (compressed) sprites skeleton on level 3
CHTAB4V.DAT (compressed) sprites the boss on level 13 (V might stand for Vizier?)
CHTAB4X.DAT (compressed) sprites Jaffar on level 14, 15
CHTAB5.DAT (compressed) sprites prince
CHTAB6.DAT (compressed) sprites princess, Jaffar in the intro, hourglass, torch flame used in the princess's room
CHTAB7.DAT (compressed) sprites Jaffar in the intro
LEV01.CHR (compressed) tiles graphics for levels 0, 1, 2, 3 (dungeon)
LEV04.CHR (compressed) tiles graphics for levels 4, 5, 6 (palace)
LEV07.CHR (compressed) tiles graphics for levels 7, 8, 9 (dungeon)
LEV10.CHR (compressed) tiles graphics for levels 10, 11 (palace)
LEV12.CHR (compressed) tiles graphics for levels 12, 13 (dungeon)
LEV14.CHR (compressed) tiles graphics for level 14 (halls)
LEV15.CHR (compressed) tiles graphics for level 15
LEV00.MAP (compressed) level level 0 (demo)
LEV01.MAP (compressed) level level 1
LEV02.MAP (compressed) level level 2
LEV03.MAP (compressed) level level 3
LEV04.MAP (compressed) level level 4
LEV05.MAP (compressed) level level 5
LEV06.MAP (compressed) level level 6
LEV07.MAP (compressed) level level 7
LEV08.MAP (compressed) level level 8
LEV09.MAP (compressed) level level 9
LEV10.MAP (compressed) level level 10
LEV11.MAP (compressed) level level 11
LEV12.MAP (compressed) level level 12 (12a) (up to the Shadow fight)
LEV13.MAP (compressed) level level 13 (12b) (a boss, but not Jaffar yet)
LEV14.MAP (compressed) level level 14 (12c) (the halls leading to the princess)
LEV15.MAP (compressed) level level 15 (12d) (the fight with Jaffar)
DEMOPLAY.KEY recorded moves Automatic moves of the prince for the demo level.
EFONT.DAT font ending credits font
ENDING1.DAT background Ending: the prince bows before the sultan
ENDING2.DAT background Ending: the prince and the princess wave to the people
ENDING3.DAT background Ending: the prince and the princess together in the sunset
ENDING4.DAT background Ending: palace garden
ENDING5.DAT background Ending: "The End" text
ENDING6.DAT background (multiple images) Ending: waving flags

Compression

  • Tools: compress.exe

The following files are compressed: TRAP.DAT, PLATE*.DAT, CHTAB*.DAT, LEV*.CHR, LEV*.MAP

Compressed data is stored as a series of blocks. Each block starts with a head byte specifying what to do, followed by 0 to 4 argument bytes.

Each block adds 4 bytes to the output, except those with head bytes 0x11, 0x21, and 0x91. Those add multiples of 4 bytes.

There is no end marker, the decompression ends when the compressed file ends.

In the arguments and the output column, each group of two letters represents a byte.

In the following table, the head bytes are ordered first by their second half, then by their first half. The system in the codes is more visible this way.

head byte arguments output
0x00 xx yy zz ww xx yy zz ww (i.e. copy the next 4 bytes to the output)
0x01 - Repeat the last 4 bytes of the output.
0x11 nn Repeat the last 4 bytes of the output, 0xnn + 1 times.
0x21 nn mm Repeat the last 4 bytes of the output, 0xmmnn + 1 times.
0x81 - Repeat the penultimate 4 bytes of the output.
0x91 nn Repeat the penultimate 4 bytes of the output, 0xnn + 1 times.

Phrased differently, start from the 8th last byte of the output, and copy (0xnn + 1) * 4 bytes.
If nn > 1 then the source overlaps the destination, and the bytes written will later become bytes read. This is intentional.

0x02 xx xx xx xx xx (i.e. write the next byte 4 times to the output)
0x03 xx yy xx yy yy yy
0x13 xx yy xx yy xx xx
0x23 xx yy xx xx yy xx
0x33 xx yy xx xx xx yy
0x04 xx yy xx xx yy yy
0x14 xx yy xx yy xx yy
0x24 xx yy xx yy yy xx
0x44 xx yy zz xx xx yy zz
0x54 xx yy zz xx yy xx zz
0x64 xx yy zz xx yy zz xx
0x74 xx yy zz xx yy yy zz
0x84 xx yy zz xx yy zz yy
0x94 xx yy zz xx yy zz zz
0xN5 (N=0..F) ba dc Na Nb Nc Nd (i.e. write bytes whose upper half comes from the head and their lower half comes from the arguments)
0xN6 (N=0..F) ba dc aN bN cN dN (i.e. write bytes whose lower half comes from the head and their upper half comes from the arguments)
0x07 xx 00 00 00 xx
0x17 xx 00 00 xx 00
0x27 xx 00 xx 00 00
0x37 xx xx 00 00 00
0x47 xx yy 00 00 xx yy
0x57 xx yy 00 xx 00 yy
0x67 xx yy 00 xx yy 00
0x77 xx yy xx 00 00 yy
0x87 xx yy xx 00 yy 00
0x97 xx yy xx yy 00 00
0xA7 xx yy zz 00 xx yy zz
0xB7 xx yy zz xx 00 yy zz
0xC7 xx yy zz xx yy 00 zz
0xD7 xx yy zz xx yy zz 00
0xF7 - 00 00 00 00
0xN8 (N=0..D or F) see above Like 0xN7, but instead of 00, use FF.
0xN9 (N=0..D) see above Like 0xN7, but instead of 00, use the corresponding byte(s) from the last 4 bytes of the output (the values from 4 bytes before).
0xNA (N=0..D) see above Like 0xN7, but instead of 00, use the corresponding byte(s) from the penultimate 4 bytes of the output (the values from 8 bytes before).

Levels

  • Tools: mapedit.exe

The levels are stored in the (compressed) LEV*.MAP files.

After decompression, levels contain the following data:

Offset Size Contents
0x0000..0x07FF 2048 (128 halfblocks * 4*4 CHR tiles) CHR tiles of each halfblock
0x0800..0x08FF 256 (128 blocks * 2 halfblocks) back layer halfblocks of each block
0x0900..0x09FF 256 (128 blocks * 2 halfblocks) front layer halfblocks of each block (The most significant bit is sometimes set, what does it mean?)
0x0A00..0x0AFF 256 (128 blocks * 2 bytes) #Block flags and objects of each block
0x0B00..0x0DCF 720 (24 rooms * 30 tiles) blocks in each room (The most significant bit is sometimes set, what does it mean?)
The remaining parts correspond to the DOS / Apple II level format from offset 0x2D0.
0x0DD0..0x109F 720 (24 rooms * 30 tiles) modifiers in each room
0x10A0..0x119F 256 #Door events 1
0x11A0..0x129F 256 #Door events 2
0x12A0..0x12FF 96 (24 rooms * 4 directions) room links (left,right,up,down) (1 to 24, or 0 if there is no adjacent room)
0x1300 1 number of used rooms
0x1301..0x1318 24 the column (x) of each room within the level map (unused)
0x1319..0x1330 24 the row (y) of each room within the level map (unused)
0x1331..0x133F 15 unused
0x1340 1 starting room (1 to 24)
0x1341 1 starting tile position (0 to 29, row*10+column)
0x1342 1 starting direction (0x00=right, 0xFF=left) Inverted on level 1 and level 13, because the prince does not turn around on those levels.
0x1343..0x1346 4 unused
0x1347..0x135E 24 guard tile position for each room (0 to 29 like the starting tile position, or 30=0x1E if no guard)
0x135F..0x1376 24 guard direction for each room (0x00=right, 0xFF=left)
0x1377..0x138E 24 unused?
0x138F..0x13A6 24 unused?
0x13A7..0x13BE 24 guard skill for each room
0x13BF..0x13D6 24 unused?
0x13D7..0x13EE 24 unused? (DOS PoP stores the guard color here)
0x13EF..0x13FF 17 unused

For level 15 (the final battle), the starting position is not used. The prince stays in the same room (room 1), tile, and direction where he was on level 14, before Jaffar teleported him to level 15.

Tiles and blocks

Tiles from LEV*.CHR files are 16×16 pixels. 4×4 tiles are combined into a halfblock (64×64 pixels). Then two halfblocks (top and bottom halves) are combined in each layer (back, front) of each block (64×128 pixels). These blocks are combined into rooms.

Blocks changed by the game

(Based on the documentation by Zarazala)

When you pick up an item or a loose floor starts falling, the block number of that tile is incremented by 1. Therefore, for each block with a potion, a sword, or a loose floor, the next block must have the same graphics and flags but no object.

Special events which change tiles similarly increase the block number by 1. The exception is the appearing of the mirror, which decreases the block number by 1.

Landing loose floors, however, don't change block numbers. The broken floors are drawn from PLATE*.DAT.

Block 0 is used for the edges of the level. It is always a wall on the original levels.

Block flags and objects

Only the first byte of each item is used, the second bytes are zero.

byte meaning notes
flags -- these can be combined with objects
0x01 floor
0x02 wall
0x04 torch Unlike in DOS / Apple II PoP, torches appear in the tile where they are placed, not one tile to the right.
objects
0x00 none
0x08 loose floor
0x10 open button The modifier selects the (first) door event to be triggered.
0x18 close button The modifier selects the (first) door event to be triggered.
0x20 gate If the modifier is 1 then the door starts open, else it starts closed.
0x28 spike
0x30 heal potion
0x38 hurt potion
0x40 life potion
0x48 upside down potion
0x50 slow fall potion
0x58 chomper
0x60 sword
0x68 mirror Not used in level data: Placed on level 4 when the exit door opens.
0x70 level door
0x78 skeleton
0x80 door top
0x88 balcony stars Used in the top left corner of balconies.

Door events

(same format as in the DOS / Apple II version)
-------------------------  7  6  5  4  3  2  1  0 <-bits
byte from door events 1 | NX R1 R0 L4 L3 L2 L1 L0
byte from door events 2 | R4 R3 R2  0  0  0  0  0

R4 R3 R2 R1 R0: The number of the room. (1..24)

L4 L3 L2 L1 L0: The location in the room. (0..29)

NX: If zero then trigger next door event, if one then don't.

Palette

The palette is stored in PALET.DAT.

It is used for the whole game, except the following:

  • It does not affect the Broderbund logo animation.
  • Nor does it affect the flashes of the screen when someone is hurt, etc. (those colors are in MAIN.PRG)

It contains 7 RGB color values, for palette slots 1-7. Slot 0 is not in the file, it is always black.

Each color is encoded in two bytes, with the bits arranged as: rrrrbbbb 0000gggg

That is, in the first byte, bits 0-3 store the blue intensity, bits 4-7 store the red intensity. In the second byte, bits 0-3 store the green intensity, and bits 4-7 are unused.

The default colors are:

index bytes HTML color
0 - #000   black
1 09 00 #009   blue
2 A0 00 #A00   red
3 BB 00 #B0B   magenta
4 00 08 #080   green
5 0D 0B #0BD   cyan
6 D0 0D #DD0   yellow
7 EE 0E #EEE   white

Tiles

  • Tools: chrconv.exe

Tiles are stored in the (compressed) LEV*.CHR files.

After decompression, they contain data for 256 tiles, each is 0x80 bytes long. The data of each tile is further split into four sections (bitplanes) of 0x20 bytes each.

To decode the image of a tile, arrange the bits of each plane in a 16×16 array. The bits should be read from bit 0 to bit 7, and the array should be filled left to right, top to bottom.

The first three planes contain bits 0, 1, and 2 of the color indices for each pixel. These are then combined into a three bits-per-pixel image.

With the default palette, these bitplanes roughly correspond to blue, red, and green components, respectively. I say "roughly" because the intensity of the enabled components is different for different colors.

The fourth plane contains transparency masks, but they are used only for tiles in the foreground layer? Each bit of the transparency mask is 0 for transparent parts and for some backgrounds, 1 otherwise.

chrconv.exe treats the transparency mask as bit 3 of the color index.

The 256 tiles should be displayed in a 16×16 arrangement, this keeps related tiles together.

Backgrounds

  • Tools: picconv.exe

Backgrounds are images without transparent parts. They don't necessarily fill the screen.

Backgrounds have this header:

  • 2 bytes: Width in bytes. Multiply by 8 to get the width in pixels.
  • 2 bytes: Height in pixels.

After the header comes the image data. The image data is compressed, but with a different method than described in #Compression.

The basic idea is the same, though: Compressed data is stored as a series of blocks. Each block starts with a head byte specifying what to do, followed by 0 to 3 argument bytes.

Backgrounds decode into three bitplanes, similarly to #Tiles, except the bytes of the planes are interleaved.

Each block adds 3 bytes to the output, or rather, one byte to each of the 3 bitplanes. The exceptions are the blocks which repeat bytes. These add multiples of 3 bytes, or, the same number of bytes to each bitplane.

There is no end marker, the decompression ends when the compressed file ends (or when the output has enough bytes?).

In the arguments and the output column, each group of two letters represents a byte.

In the following table, the head bytes are ordered first by their second half, then by their first half. The system in the codes is more visible this way.

head byte arguments output
0x00 nn Repeat the next 3×1 bytes of the output 0xnn times.
0xN0 (N=1..F) - Repeat the next 3×1 bytes of the output N times.
Note: The above two codes are a bit tricky. When you see a head byte ending in 0, don't write anything into the output yet.

Just set a flag which reminds you that you need to repeat, and also store the value of nn or N as repeat_count. Every time after you processed a block which is not a "repeat next" block, check if the repeat flag is set. If it is, then repeat the last 3×1 bytes repeat_count times.

0x01 xx xx xx xx (i.e. write the next byte 3 times to the output)
0x02 xx yy xx xx yy
0x12 xx yy xx yy xx
0x22 xx yy xx yy yy
0x03 xx yy zz xx yy zz (i.e. copy the next 3 bytes to the output)
0x04 xx 00 00 xx
0x14 xx 00 xx 00
0x24 xx xx 00 00
0x34 xx yy 00 xx yy
0x44 xx yy xx 00 yy
0x54 xx yy xx yy 00
0x05 xx FF FF xx
0x15 xx FF xx FF
0x25 xx xx FF FF
0x35 xx yy FF xx yy
0x45 xx yy xx FF yy
0x55 xx yy xx yy FF
Note: 0xN5 head bytes are like 0xN4 head bytes, except they use 0xFF instead of 0x00.
0x06 - 00 00 00
0x16 - FF 00 00
0x26 - 00 FF 00
0x36 - FF FF 00
0x46 - 00 00 FF
0x56 - FF 00 FF
0x66 - 00 FF FF
0x76 - FF FF FF
Note: A 0xN6 head byte basically appends 8 pixels with color N.

The appended bytes are filled with bits 4, 5, and 6 of the head byte, respectively.

0xR7 nn Go up R+1 scanlines from where you are (i.e. go back (R + 1) × width in bytes × 3 bytes), read 0xnn × 3 bytes from there, and append them to the output.

ENDING6.DAT

ENDING6.DAT has a slightly different format, because it contains multiple images.

The file begins with 12 offsets, 2 bytes each. These offsets tell where each image starts in the file.

The images themselves are in the same format as the other #Backgrounds.

Sprites

  • Tools: patview.exe

Sprites are in the files FIRE.DAT, CHTAB*.DAT, PLATE*.DAT, TRAP.DAT. They are compressed, except for FIRE.DAT.

The files begin with the following header:

  • 2 bytes: The number of images.
  • For each image:
    • 2 bytes: The offset part of the address. (Always in 0x0..0xF?)
    • 2 bytes: The segment part of the address.
    • To get the actual start address of the image, calculate segment * 16 + offset.
    • This strange form of addressing comes from the x86-compatible CPU in the PC-98.

The images are in the following format:

  • 1 byte: Width in bytes. Multiply by 8 to get the width in pixels.
  • 1 byte: Height in pixels.
  • Data.

The data of the sprite images can decompressed in the following way:

  • Repeat until you have width in bytes × height × 4 bytes in the output:
    • Read a head byte.
    • If head byte >= 0x80:
      • Append (head byte - 0x80 + 1) × 4 zero bytes to the output.
    • else:
      • Copy the next (head byte + 1) × 4 bytes from the input to the output.

The resulting output consists of four interleaved bitplanes.

  • To decode, go through the output four bytes at a time.
    • Within each group, the first byte belongs to the first bitplane, the second byte to the second bitplane, and so on.
  • The first three planes contain bits of the color indices, while the fourth contains a transparency mask.
    • Each bit of the transparency mask is 0 for transparent pixels, 1 otherwise.
    • patview.exe treats the transparency mask as bit 3 of the color index.
  • The bits in the bitplanes are arranged in the same way as in tiles and backgrounds: the bits from bit 0 to bit 7 go into 8 pixels from left to right.
  • But the order of bytes is different: Each byte corresponds to a block of 8 pixels, below the previous block.
    • This will first fill a vertical strip of 8 pixels on the left side of the image.
    • When you reach the bottom of the image, continue at the next vertical strip of 8 pixels.

Hit point images

The hit point images are in MAIN.PRG at the following offsets:

offset content
0xAE92..0xAFB1 prince's full hit point (red)
0xAFB2..0xB0D1 prince's empty hit point (black)
0xB0D2..0xB1F1 guard's full hit point (green)

All of them are 24×24 pixels, and are stored as four bitplanes, like the tiles.

BJLOGO.PRG contains the images of the Broderbund logo animation shown at startup.

(BJ probably stands for Broderbund Japan. [1])

Black and white images

Offsets 0xF68..0xF6D contain the offsets of the three b/w images.

The offsets are as follows:

offset image
0x0F6E triple crown
0x117E "Broderbund"
0x161E "Presents"

These images are stored in the following format:

  • 2 bytes: width (in pixels)
  • 2 bytes: height
  • For each scanline (1..height):
    • 2 bytes: offset of the next scanline (relative to the start address of the image)
    • Repeat until you have the whole scanline:
      • Read a head byte.
      • If head byte == 0x00 then this scanline is the same as the previous. Exit the loop.
      • If 0x01 <= head byte <= 0x7E then append head byte black pixels.
      • If head byte == 0x7F then
        • Read extra byte.
        • Append extra byte + 0x7E black pixels.
      • If head byte >= 0x80 then append head byte - 0x80 white pixels.

Color image

The color image starts at offset 0x17CE and it's in the same format as #Backgrounds.

Fonts

  • Tools: fontconv.exe

Fonts are stored as a sequence of 1-bits-per-pixel images. The bits within a byte correspond to pixels in the same way as for other images, but now there is only one bitplane.

The size of the images and the included characters depend on the font.

File number and size of glyphs contained characters notes
FONT.DAT 48 glyphs of 16×16 pixels (32 bytes) each 0-9 A-Z . , / # (followed by 8 empty images) "#" appears as the symbol of the Enter key: ↵⃣
EFONT.DAT 45 glyphs of 24×24 pixels (72 bytes) each A-M O P S T Y a-i k-p r-w y z ( ) - . missing letters: N Q R U-X Z j q x

For FONT.DAT, the advance width of all glyphs is 16 pixels.

SUBPROG.PRG contains the following information about EFONT.DAT:

  • Offsets 0x556E..0x55CD contain a mapping table from the ASCII codes 0x20..0x7F to the (1-based) glyph indices in the font.
    • Zero means the font has no glyph for the character.
  • Offsets 0x55CE..0x55FB contain the advance width for each glyph, in pixels.
    • The table has 46 bytes, one more than glyphs in the font. Perhaps the last item is for the space?

The font used on the images in TITLE2.DAT and TITLE3.DAT is similar to the font in EFONT.DAT, but it has slightly shorter capital letters.

Japanese font

The game does not contain font for Japanese text. Instead, it uses the 16×16 font contained in the ROM of PC-98. (FONT.ROM in Neko Project 2.)

The game transforms that font slightly:

  • In the menu, the font is made thicker.
    • This is done by drawing each glyph twice, the second time offset by one pixel to the side.
  • In the intro, the font is made thicker as above.
    • Additionally, a black outline is added to the glyphs, and they are filled with a gradient which goes from yellow at the top to white at the bottom.

Texts

The texts of the game are in MAIN.PRG and SUBPROG.PRG.

Texts use the Shift-JIS encoding. For English text, this matches ASCII.

  • The end of the text is marked with 0x00.
  • Newlines are marked with 0x0D (ASCII carriage return).
  • 0x1E denotes a narrow space (8 pixels wide) used for centering menu items and table captions.
    • 0x1F does the same, but it's not used in the original texts.
  • All other characters display as wide (16 pixels wide).
    • This includes the ASCII space (0x20), that's why a separate code exists for narrow space.
    • The existing English translation would look less awkward if ASCII characters could appear as narrow.

Music

Music is stored in *.MUS files. Sound effects are stored in *.EFC files.

Both start with the following header:

  • 2 bytes: Offset to the instruments data.
  • 1 byte: 0

.MUS files continue with the following:

  • 1 byte: 0
  • 1 byte: Flags to enable channels. (Bits 0..5 correspond to channels 1..6.) Should be 0x3F to enable all channels.
  • For each of the 6 channels:
    • 2 bytes: Offset to the sequence of this channel.

Sequences

The structure of each channel's sequence:

  • For each item:
    • 1 byte: Repeat count (0x01..0xFD).
    • 2 byte: Offset of the command string.
    • (The items are played in sequence.)
  • 1 byte: end marker
    • 0xFF = stop (for "event" music, for example potions) (0x00 seems to mean the same?)
    • 0xFE = loop (for background music)
      • 0xFE is followed by a 2 byte offset (into the sequence) that tells where to restart when looping.

.EFC files have a single sequence starting from offset 3. Each item of this sequence represents a separate sound effect. There is no end marker.

Command strings

Command strings are ASCII strings terminated with a 0x00 byte.

The possible commands are:

command parameter scope meaning
type range initial
(on startup)
default
(if omitted)
T n 0-255 0 0 global set tempo, i.e. set the unit of note length to n * 0.0003 seconds
V n 0-15 13 0 channel set volume
^ channel increase volume (wraps around from 15 to 0)
_ channel decrease volume (stops at 0)
@ n 0-255 255 0 channel set instrument
O n 0-7 4 0 channel set octave
+ channel up one octave (wraps around from 7 to 0)
- channel down one octave (wraps around from 0 to 7)
C,D,E,F,G,A,B n 0-255 0 previous channel play note (n = set length of this note and next ones, relative to Tn)
# channel make the next note sharp
R n 0-255 0 previous channel play rest (n = same as for CDEFGAB)
[ channel start merge? (disable Decay?)
& channel separate merge? (disable Attack?)
] channel end merge? (enable Attack and Decay?)
) n 0-255 0 channel set detune? (signed)
 ! global Notify the game that it can continue. Used in APPEAR.MUS and ROOM1.MUS.

Instruments

The structure of instruments data:

  • For each instrument:
    • 2 byte: Offset to instrument data of this instrument.

Each instrument data is 31 bytes. I haven't looked into their contents. The documentation by Zarazala in the #External links contains some information about them.

Recorded moves

DEMOPLAY.KEY contains the automatic moves of the prince for the demo level.

  • For each item:
    • 1 byte: state of the keys (bitflags)
    • 1 byte: number of ticks for which the specified state applies

Each state byte is the sum of the values corresponding to the pressed keys:

  • 0x01 = up
  • 0x02 = down
  • 0x04 = left
  • 0x08 = right
  • 0x10 = Space (has the same effect as Shift, not used in the original DEMOPLAY.KEY)
  • 0x20 = Shift
  • 0x40 = (no effect)
  • 0x80 = (no effect)

The demoplay ends when both bytes of an item are 0xFF.

User disk

The user disk (Disk B) contains the following data.

All offsets are for headerless disk images.

At 0x00..0x0F: Header

  • 2 bytes: 01 00
  • 10 bytes: "USER DISK" 00 -- The game checks these bytes to see if the disk is a user disk.
  • 4 bytes: date and time when the user disk was created/formatted

The date is stored in the following format:

offset 0x0C 0x0D 0x0E 0x0F
bits 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
meaning year month day hour minute second

That is, if you consider the value to be a single 32-bit big-endian number, then you have the following fields from MSB to LSB:

  • 6 bits: year: The lower 6 bits of the last two digits of the year. In C code: (year % 100) % 64.
  • 4 bits: month (1-12)
  • 5 bits: day (1-31)
  • 5 bits: hour (0-23)
  • 6 bits: minute (0-59)
  • 6 bits: second (0-59)

At 0x10..0x5F: Saved games

  • For each save slot 1..10:
    • 1 byte: level number (1-14), or 0 if the slot is empty
      • Level 13 and 14 are shown as 12 in the save/load game menus.
      • If you save on level 15 (final fight), the save will be for level 14.
      • If you try to load a save with level 15, you get an error message.
    • 1 byte: hit points
    • 1 byte: remaining minutes
    • 1 byte: unused
    • 2 bytes: remaining ticks (1/8 seconds)
    • 1 byte: movement speed setting (1-9)
    • 1 byte: battle speed setting (1-9)

At 0x60..0x7D: Starting time for saved games

  • For each save slot 1..10: Remaining time when the level was loaded (before the save was made)
    • 1 byte: remaining minutes
    • 2 bytes: remaining ticks (1/8 seconds)

I'm not sure what is this for.

At 0x80..0x13F: Best times

  • For each level 1..12:
    • 1 byte: best time minutes
    • 1 byte: unused
    • 2 bytes: best time ticks (1/8 seconds)
    • 8 bytes: player name
    • 2 bytes: 0xFFFF if there is a replay for this level, 0x0000 if not.
    • 1 byte: starting hit points for the replay
    • 1 byte: 0 for most levels, 2 for level 12
      • This is the number of additional replays (level 13 and 14), but it's ignored on read.

An entry with zero time is considered empty.

The starting remaining time is not stored for replays.

At 0x210..0x25F: Player names for saved games

  • For each save slot 1..10:
    • 8 bytes: player name

Player names are padded with spaces; except if the name is empty, then it's all zero bytes.

Replays for best times

  • At 0x02000..0x03FFF: replay for level 1
  • At 0x04000..0x05FFF: replay for level 2
  • At 0x06000..0x07FFF: replay for level 3
  • At 0x08000..0x09FFF: replay for level 4
  • At 0x0A000..0x0BFFF: replay for level 5
  • At 0x0C000..0x0DFFF: replay for level 6
  • At 0x0E000..0x0FFFF: replay for level 7
  • At 0x10000..0x11FFF: replay for level 8
  • At 0x12000..0x13FFF: replay for level 9
  • At 0x14000..0x15FFF: replay for level 10
  • At 0x16000..0x17FFF: replay for level 11
  • At 0x18000..0x19FFF: replay for level 12
  • At 0x1A000..0x1BFFF: unused (!)
  • At 0x1C000..0x1DFFF: replay for level 13
  • At 0x1E000..0x1FFFF: replay for level 14 and 15

Replays are in the same format as DEMOPLAY.KEY, except the end is not marked. Worse, there is junk data after the replay data. The replay (and the recording) ends when the player completes the level.

Replays of level 12 and 13 for saved games

  • At 0x20000..0x23FFF: replays for save slot 1
  • At 0x24000..0x27FFF: replays for save slot 2
  • At 0x28000..0x2BFFF: replays for save slot 3
  • At 0x2C000..0x2FFFF: replays for save slot 4
  • At 0x30000..0x33FFF: replays for save slot 5
  • At 0x34000..0x37FFF: replays for save slot 6
  • At 0x38000..0x3BFFF: replays for save slot 7
  • At 0x3C000..0x3FFFF: replays for save slot 8
  • At 0x40000..0x43FFF: replays for save slot 9
  • At 0x44000..0x47FFF: replays for save slot 10

Each area contains the following:

  • At 0x0000..0x1FFF: replay of level 12, if you saved on level 13 or 14
  • At 0x2000..0x3FFF: replay of level 13, if you saved on level 14

If you saved on any other level, the area of the slot contains only junk data.

This is needed because replays for levels 12-14 are saved to the main replay area together, when you finish level 14.

TODO

  • FM Towns version (PRI1.DAT)
  • Hacks for easier playtesting: skipping the Broderbund logo, starting any level.
  • VCLIP.DAT
  • TODO: How to make an empty disk. How to add a file.
  • TODO: Document the offsets of all texts?

External links